510 Battery Pro Fingerprint Identification Battery Adjust Voltage

THC CBD vape cartridge battery

Specification

Features

Body Material：Aluminium alloy

Battery：510 thread

Charging Port：Type-C

Number：510 Pro

Category：THC CBD vape cartridge battery

Capacity：750mAh Fingerprint Identification

Manufacturer：DankSmoke

Color：Red black or customize colors

CBD vape manufacturer independent R&D Fingerprint Identification Battery. Preheating function.

Luxury with 3.2V 3.7V 4.2V adjust voltage for vaping cartridge by 750mAh capacity battery.

All aluminium alloy main body precision material. 100% no complaint

Type-C and 510 thread chargers for recharge, 2 ways to recharge.

Get An Quote WhatsApp

China cbd vape manufacturer new job – 510 Battery Pro Fingerprint Identification Battery Adjust Voltage

This is for 510 thc carts and cbd carts.

No matter 0.5ml thc cartridge and cbd cartridge, or 2.0ml cartridges. Cover all kinds of carts.

Because it come with adjustable voltage battery 3.2V 3.7V 4.2V. And 750mAh super big capacity enough long vaping time.

Aluminum alloy main body precision materials match together, showing top luxury quality.

Price not cheap enjoy the experience of premium hardware.

This one major functions:

1. Fingerprint Identification , only you can use it after you finish fingerprint identification. No one can unlock this battery.

2. Voltage adjustable. 510 thread battery for cbd thc carts.

We also have many 510 vape batteries for option: Vape Cartridge Batteries 510 Thread For CBD THD Cartridge

Please check more details in the form.

No.	Function listings		Functional Parameters & Description
1	Battery and voltage	Rated working voltage	3.7V rechargeable lithium battery
		Working voltage range	3.2V-4.2V by 750mAh battery.
		Standby power	Less than 15 microamperes
		Low voltage detection (Reminder to charge)	When the battery voltage is below 3.0V (positive or negative 0.1V), touch the fingerprint module, the red light will flash rapidly for 3 times, and at the same time, it will vibrate rapidly for 200ms three times, indicating the need for charging
2	Active State	Power on status	Red and green flash once each (order: red, green)
		Power on operation	Touch the fingerprint module for 3 seconds while turning off the device, recognize the fingerprint, and turn on the device. Shake the device once every 500ms and flash the corresponding output indicator light 3 times
		Power off operation	Touch the fingerprint module continuously for 5 times within 2 seconds when the device is turned on (the first four times touch the fingerprint module and do not recognize fingerprints, and the fifth touch requires fingerprint recognition), vibrate once every 200ms, flash the corresponding output indicator light 3 times, and turn off the device. (Automatic shutdown after 12 minutes of inactivity)
		Enter fingerprint	Press the battery side hole button once with the dedicated accessory when turned on, and the green light will flash three times to prompt fingerprint entry. Within 10 seconds, continuously enter the same finger fingerprint four times, and the green light will flash three times again. The motor will vibrate once every 500ms to indicate successful fingerprint entry (if not successful, the red light will flash three times to prompt the need to re-enter the fingerprint four times)
		Delete fingerprint	Press the battery side hole button with the dedicated accessory continuously for 3 seconds while turning on the device, and the orange indicator light will remain on. Touch the fingerprint module with the finger that needs to be deleted continuously for 3 seconds, and the orange indicator light will flash again three times. The motor will vibrate for 500ms at the same time, indicating that the fingerprint deletion is successful
		Smoking operation	1. Place your finger in the fingerprint module area (which does not recognize fingerprints) and the corresponding smoking light will gradually turn on, and the atomizer will start working. 2. Fingers leave the fingerprint module recognition area, turn off MOS, and the corresponding light gradually goes out.
		Coil resistance	0.8Ω≤
		Adjust voltage operation	Voltage regulation output, touch the fingerprint module three times within 2 seconds, vibrate for 200ms three times (the first two times are touch fingerprint module, do not recognize fingerprints, the third touch requires fingerprint recognition), jump to 3.0V 3.7V 4.2V output. If the battery cell voltage is less than 4.2V or 3.7V, it will output full power. Blue corresponds to 3.0-3.6V, white corresponds to 3.6-3.9V, green corresponds to 3.9-4.2V
		Smoking timeout indication	Every time the normal smoking time exceeds 10 seconds, the red light flashes 3 times and then goes out, indicating that smoking has exceeded the time limit
		Preheating operation	In the power on state, the fingerprint touch fingerprint module enters the preheating mode twice within 2 seconds, and vibrates twice for 200ms (the previous touch fingerprint module does not recognize fingerprints, and the second touch requires fingerprint recognition), with a time of 15 seconds. The breathing light mode flashes green once per second
		Preheating indication	After entering the preheating mode, the green light will flash in the breathing light mode, and the preheating is completed and the light will be turned off. Touching the fingerprint module once (without recognizing fingerprints) can cancel it, and the light will immediately turn off
		Preheating power	Output voltage 2.0V (positive and negative deviation 0.1V) output
3	Charging details	Charger specifications	TYPE-C (DC5V) or 510 thread head (4.2V) charging
		Charging status and charging protection	After connecting the electronic cigarette to the charger for charging, it vibrates once every 500ms and enters the charging mode through the green breathing light mode
			When charging, if there is a short circuit at the output terminal of the charger, the motherboard will stop charging, the green breathing light will turn off, and the red light will flash 4 times
		Charging power outage	During the charging process or when fully charged, remove the external charger, and the green breathing light will turn off/the green light will flash three times when fully charged before turning off. Exit the charging state and enter sleep mode
		Charging saturation voltage	4.15±0.05V
		Charging saturation state	When the battery voltage is detected to be 4.15 ± 0.05V, the green light flashes three times and then turns off, indicating that the battery is fully charged
		Charging use	When battery was charging by Type-c. You can continue enjoy smoking.
		Zero volt charging	When the battery voltage is close to 0V, TYPE-C can fully charge the battery voltage
	Short circuit protection	Short circuit/open circuit low resistance Over Temperature Protection	If there is a short circuit/open circuit at the output terminal and the fingerprint module is touched, the red light will flash 4 times before entering sleep mode, indicating that there is a short circuit/open circuit at the output terminal. In this state, there is no output at the output terminal, and the electronic cigarette will automatically protect itself
5	OEM ODM orders	MOQ 10k 30% deposit + 70% balance	We are cbd vape manufacturer, we produce all vape hardwares for cbd thc oils. The 510 series batttery,510 vape battery, we have classic models, affordable models. Chinese best vape manufacturer recommend to you. And this one is preheat vape battery for all kinds of thc carts